Black and Decker BXAC7E Air Conditioner Manual

The Black and Decker BXAC7E is a portable air conditioner designed to cool rooms up to 150 square feet. It features a 7,000 BTU cooling capacity, a dehumidifier function, and a fan-only mode. This unit is equipped with a remote control, programmable timer, and adjustable thermostat for optimal comfort. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, programmable timer, dehumidifier function.

FeatureDescription
7,000 BTU Cooling CapacityCools rooms up to 150 sq. ft.
Dehumidifier FunctionRemoves excess moisture from the air.
Remote ControlConvenient operation from a distance.
Programmable TimerSet the unit to turn on/off at specific times.
Adjustable ThermostatCustomize your comfort level.
Fan-Only ModeCirculates air without cooling.
Easy InstallationIncludes window installation kit.
Energy EfficientDesigned to save on energy costs.

Installation

Unpack and inspect contents. Choose a suitable location for the air conditioner.

  1. Install the window kit: Follow the instructions to fit the unit in the window.
  2. Connect the exhaust hose: Ensure it is securely attached to the unit and window kit.
  3. Plug into a power outlet: Use a dedicated circuit for optimal performance.

WARNING! Ensure the unit is stable and secure to avoid accidents.

First-Time Setup

Power on the air conditioner; follow the remote control instructions.

  1. Set the desired temperature using the adjustable thermostat.
  2. Choose the cooling mode: Select between cool, fan, or dehumidifier.
  3. Program the timer if needed for automatic operation.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Controls and Settings

Access settings via the remote control or control panel on the unit. Features include temperature adjustment, mode selection, and fan speed settings.

Connecting Devices

Ensure the air conditioner is plugged into a suitable power outlet. No additional devices are required for operation.

Operating the Air Conditioner

To operate, use the remote control or the control panel. Adjust settings as needed for optimal comfort.

Maintenance and Care

Regularly clean the air filter and ensure the unit is free from obstructions for optimal performance.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.blackanddecker.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit does not turn onPower supply issueCheck the power outlet and circuit breaker.
No coolingIncorrect settingsEnsure the unit is set to cooling mode.
Excessive noiseObstruction or loose partsCheck for obstructions and tighten any loose components.
Water leakageFull water tankEmpty the water tank and ensure proper drainage.

Reset: Unplug the unit for 5 minutes to reset.

Service: Contact customer service for further assistance.

Black and Decker BXAC7E Air Conditioner Manual © - All Rights Reserved 2026