Black and Decker BXAC12001E Air Conditioner Manual

The Black and Decker BXAC12001E is a portable air conditioner designed to cool rooms up to 300 square feet. It features a 12,000 BTU cooling capacity, three cooling speeds, a dehumidifier function, and a programmable timer. The unit is equipped with a remote control for convenience and has an easy-to-install window kit for quick setup. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, dehumidifier function, programmable timer.

Feature	Description
Cooling Capacity	12,000 BTU for effective cooling
Dehumidifier	Removes excess moisture from the air
Remote Control	Convenient operation from a distance
Programmable Timer	Set cooling schedules for energy efficiency
Window Kit	Easy installation for various window types
Three Cooling Speeds	Customize cooling based on preference
Energy Efficiency	Designed to save on energy costs

Installation

Unpack the air conditioner and inspect for any damage. Follow the steps below for installation.

Choose a suitable location near a window.
Install the window kit according to the instructions.
Plug the unit into a grounded outlet.
Ensure the exhaust hose is securely attached.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts for initial setup.

Select cooling mode using the remote control.
Set your desired temperature using the thermostat.
Adjust fan speed as needed.
Program the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 300 square feet.
Power Supply: 115V/60Hz.
Air Flow: Adjustable fan speeds.
Dehumidification: Up to 3 pints per hour.
Weight: 70 lbs.
Dimensions: 30 x 18 x 15 inches.

Controls and Settings

Access settings via the remote control or the control panel on the unit. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: POWER, MODE, TEMP, FAN, TIMER.

Settings: Adjust temperature, select cooling mode, and set timer for operation.

Connecting Devices

The air conditioner does not require additional devices for operation. Ensure the power outlet is suitable for the unit's requirements.

Ensure the unit is unplugged before connecting to power.
Use a grounded outlet to prevent electrical issues.

Tip: Avoid using extension cords to ensure safety.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings using the remote control or control panel.

Press POWER to turn on the unit.
Select the cooling mode.
Adjust the temperature and fan speed as needed.
Use the timer function for scheduled operation.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Follow these care instructions:

Clean or replace the air filter every month.
Wipe the exterior with a damp cloth.
Check for any blockages in the air intake and exhaust.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit the Black and Decker website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and outlet.
No cooling	Incorrect settings	Ensure cooling mode is selected.
Excessive noise	Blocked air intake	Check for obstructions.
Water leakage	Full water tank	Empty the water tank.

Reset: Unplug the unit for 10 seconds to reset.

Service: For assistance, contact customer support.