Black and Decker BWAC10WT Air Conditioner Manual

The Black and Decker BWAC10WT is a 10,000 BTU window air conditioner designed to cool rooms up to 450 square feet. It features a programmable timer, remote control, and multiple cooling and fan speeds. The unit is equipped with an energy saver mode, a dehumidification function, and a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 10,000 BTU cooling capacity, remote control, programmable timer, multiple cooling settings, energy saver mode, washable filter.

Feature	Description
Cooling Capacity	10,000 BTU, suitable for rooms up to 450 sq. ft.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off at specific times.
Energy Saver Mode	Automatically turns off the compressor when the desired temperature is reached.
Dehumidification	Removes excess moisture from the air.
Washable Filter	Easy to clean and maintain for optimal performance.

Installation

Unpack and inspect the air conditioner. Ensure you have all necessary components for installation.

Choose a suitable window: Ensure the window is within the unit's size specifications.
Install the mounting brackets: Follow the included instructions for proper installation.
Secure the air conditioner: Place the unit in the window and secure it according to the manual.
Plug into AC power: Ensure the unit is connected to a grounded outlet.

WARNING! Ensure the unit is securely installed to prevent accidents.

First-Time Setup

Power on the air conditioner; follow the remote control prompts.

Select cooling mode: Use the remote to choose the desired cooling mode.
Set temperature: Adjust the temperature using the remote control.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before operating.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 450 sq. ft.
Power Supply: 115V, 60Hz.
Energy Efficiency Ratio (EER): 12.1.
Noise Level: 52 dB (low setting).
Dimensions: 15.4 x 19 x 20.5 inches.
Weight: 70 lbs.

Controls and Settings

Access settings via the remote control. Controls include: POWER, MODE, TEMP, FAN SPEED, TIMER.

Remote: POWER, MODE selection, temperature adjustment, fan speed control, timer settings.

Cooling modes: Cool, Fan, Dry. Fan speeds: High, Medium, Low.

Connecting Devices

Ensure the air conditioner is properly connected to a power source before use.

Turn off the air conditioner before connecting any devices.
Ensure all connections are secure.

Tip: Use a surge protector to safeguard the unit from power surges.

Operating the Air Conditioner

To operate, use the remote control to select your desired settings.

Turn on the unit: Press the POWER button on the remote.
Select cooling mode: Choose from Cool, Fan, or Dry.
Adjust temperature: Set your desired temperature using the remote.
Use the timer: Program the timer for automatic on/off.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The air conditioner includes a remote control for easy access and operation from a distance.

Care & Cleaning

Unplug the unit before cleaning. Use a dry cloth to wipe the exterior; do not use liquids or aerosols.

CAUTION! Ensure the filter is cleaned regularly for optimal performance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.blackanddecker.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Settings or filter	Ensure settings are correct; clean or replace filter.
Excessive noise	Improper installation	Check installation and ensure unit is level.
Remote not working	Batteries	Replace batteries in the remote control.

Reset: Unplug the unit for a few minutes to reset.

Service: For assistance, contact customer service at 1-800-234-5678.