The Black and Decker BWAC05MWTB is a 5,000 BTU window air conditioner designed for cooling small rooms up to 150 square feet. It features a mechanical control panel, adjustable air direction, and multiple cooling and fan speeds to ensure comfort during hot weather. The unit is equipped with a washable filter, energy saver mode, and a quiet operation for a more pleasant indoor environment. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: 5,000 BTU cooling capacity, adjustable air direction, multiple cooling and fan speeds, energy saver mode, washable filter.
| Feature | Description |
|---|---|
| Cooling Capacity | 5,000 BTU, suitable for rooms up to 150 sq. ft. |
| Control Type | Mechanical control panel for easy operation. |
| Fan Speeds | Multiple speeds for customized comfort. |
| Air Direction | Adjustable louvers for optimal airflow. |
| Filter | Washable filter for easy maintenance. |
| Energy Saver Mode | Helps reduce energy consumption. |
| Noise Level | Quiet operation for minimal disruption. |
Unpack and inspect contents. Ensure window is suitable for installation.
WARNING! Ensure the unit is securely installed to avoid accidents.
Power on the air conditioner; adjust settings as needed.
CAUTION! Do not block air intake or exhaust.
Access settings via the mechanical control panel. Features include temperature control, fan speed selection, and mode selection.
Remote: Not included; manual controls only.
No external devices required for operation. Ensure proper electrical outlet is used.
To operate, select the desired mode and adjust the temperature and fan speed accordingly.
WARNING! Do not operate without a filter.
Regularly clean the filter and ensure the unit is free from obstructions.
CAUTION! Unplug before cleaning.
This unit complies with FCC regulations for residential use. For support, visit www.blackanddecker.com or contact customer service.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Unit does not turn on | Power supply issue | Check outlet and power cord. |
| No cooling | Incorrect settings | Ensure cooling mode is selected. |
| Excessive noise | Loose parts | Check for loose screws or components. |
| Water leakage | Improper installation | Ensure unit is level and properly installed. |
Service: For further assistance, contact customer service.