Black and Decker BPT07WTB Air Conditioner Manual

The Black and Decker BPT07WTB is a portable air conditioner designed for cooling rooms up to 150 square feet. It features a 7,500 BTU cooling capacity, a dehumidifier function, and a fan-only mode. The unit is equipped with a remote control, programmable timer, and adjustable thermostat for optimal comfort. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable fan speeds, programmable timer, and dehumidifier function.

Feature	Description
Cooling Capacity	7,500 BTU for effective cooling
Dehumidifier Function	Removes excess moisture from the air
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off automatically
Adjustable Thermostat	Customize your comfort level

Installation

Unpack the air conditioner and inspect for any damage. Follow these steps for installation:

Choose a suitable location near a window.
Install the window kit according to the instructions.
Connect the exhaust hose to the unit and the window kit.
Plug the unit into a grounded outlet.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner and follow the remote control instructions.

Select the desired cooling mode using the remote.
Set the temperature using the adjustable thermostat.
Program the timer if needed.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 7,500 BTU.
Room Size: Up to 150 square feet.
Power Supply: 115V/60Hz.
Weight: Approximately 60 lbs.
Dimensions: 28.5 x 17.5 x 14 inches.
Noise Level: 52 dB.
Features: Remote control, programmable timer, adjustable thermostat, dehumidifier function.

Controls and Settings

Access settings via the remote control or the control panel on the unit. Options include cooling mode, fan speed, and temperature adjustment.

Remote: Power, mode selection, temperature adjustment, timer settings.

Connecting to Power

Ensure the air conditioner is plugged into a grounded outlet. Avoid using extension cords.

Check the power supply voltage.
Plug the unit directly into the wall outlet.
Ensure the outlet is functional before use.

Tip: Use a surge protector for added safety.

Operating the Air Conditioner

To operate the air conditioner:

Press the power button to turn on.
Select the cooling mode and adjust the temperature.
Use the fan settings for additional airflow.
Monitor the room temperature for optimal comfort.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance. Follow these guidelines:

Clean or replace the air filter every month.
Inspect the exhaust hose for blockages.
Wipe the exterior with a damp cloth.
Store the unit in a dry place during off-seasons.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power supply	Check the outlet and power cord.
No cooling	Incorrect settings	Adjust the thermostat and mode settings.
Excessive noise	Blocked air intake	Clear any obstructions around the unit.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Service: For further assistance, contact customer support.