Black and Decker BPP10HWTB Air Conditioner Manual

The Black and Decker BPP10HWTB is a portable air conditioner designed to cool spaces up to 250 square feet. It features a 10,000 BTU cooling capacity, a dehumidifier function, and a programmable timer. This unit is equipped with a remote control for convenience and has multiple fan speeds to ensure optimal comfort. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, programmable timer, multiple fan speeds, and a dehumidifier function.

Feature	Description
10,000 BTU Cooling	Cools spaces up to 250 sq. ft.
Dehumidifier Function	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off at specific times.
Multiple Fan Speeds	Adjustable settings for personalized comfort.

Installation

Unpack and inspect the air conditioner. Place it near a window for easy venting.

Install the window kit: Follow the instructions to fit the kit to your window size.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into an AC outlet: Ensure the outlet is grounded and can handle the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner; follow the remote control instructions.

Select cooling mode: Use the mode button on the remote to choose cooling or dehumidifying.
Set desired temperature: Adjust the temperature using the up/down buttons.
Program timer: Use the timer function to set when the unit should turn on or off.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 10,000 BTU.
Coverage Area: Up to 250 sq. ft.
Power Supply: 115V/60Hz.
Air Flow: Adjustable fan speeds.
Weight: Approximately 70 lbs.
Dimensions: 30" H x 18" W x 15" D.
Noise Level: 52 dB on low setting.

Controls and Settings

Access settings via the remote control or the unit's control panel. Features include cooling mode, fan speed, temperature adjustment, and timer settings.

Connecting Devices

Ensure the air conditioner is plugged into a suitable power outlet. No additional devices are required for operation.

Operating the Air Conditioner

To operate, use the remote control or the control panel. Adjust settings as needed for optimal comfort.

Maintenance and Care

Regularly clean the air filter and ensure the exhaust hose is clear of obstructions.

CAUTION! Always unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Improper installation	Check window kit and exhaust hose connections.
Remote not working	Batteries	Replace batteries in the remote control.
Excess noise	Loose parts	Tighten any loose screws or components.
Water leakage	Full water tank	Empty the water tank and ensure proper drainage.

Service: For further assistance, contact customer support.