Black and Decker BPP06WTB Air Conditioner Manual

The Black and Decker BPP06WTB is a portable air conditioner designed to provide efficient cooling for rooms up to 150 square feet. It features a 6,000 BTU cooling capacity, a dehumidifier function, and a fan-only mode. The unit is equipped with a remote control, programmable timer, and adjustable thermostat for user convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, programmable timer, dehumidifier function.

Feature	Description
Cooling Capacity	6,000 BTU for efficient cooling
Dehumidifier	Removes excess moisture from the air
Fan Mode	Circulates air without cooling
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off automatically
Adjustable Thermostat	Customize your comfort level

Installation

Unpack and inspect contents. Place the unit on a flat, stable surface near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into a power outlet: Ensure the outlet is grounded and rated for the unit's power.

WARNING! Ensure proper ventilation and avoid blocking air intake/exhaust.

First-Time Setup

Power on the unit; follow the remote control instructions.

Select cooling mode: Use the mode button on the remote.
Set desired temperature: Adjust using the up/down buttons.
Program timer: Use the timer button to set on/off times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 6,000 BTU.
Room Size: Up to 150 sq. ft.
Power Supply: 115V/60Hz.
Weight: Approximately 50 lbs.
Noise Level: 52 dB.
Dimensions: 28.5 x 17.5 x 14 inches.
Energy Efficiency Ratio (EER): 12.1.

Controls and Settings

Access settings via the remote control or control panel on the unit. Modes include cooling, fan, and dehumidifier.

Remote: POWER, MODE, TEMP UP/DOWN, TIMER, FAN SPEED.

Adjust settings for optimal comfort and energy efficiency.

Connecting to Power

Ensure the unit is plugged into a grounded outlet. Avoid using extension cords.

Check voltage requirements: Ensure compatibility with your outlet.
Plug in the unit: Use the power cord provided.
Turn on the unit: Use the power button or remote control.

Tip: Always unplug the unit when not in use for safety.

Operating the Air Conditioner

Use the remote control for convenient operation.

Adjust temperature: Use the temperature buttons on the remote.
Change modes: Switch between cooling, fan, and dehumidifier modes as needed.
Set timer: Program the unit to turn on or off at specific times.

WARNING! Do not block air intake or exhaust vents.

Accessibility Features

Remote control provides easy access to all functions. The unit is designed for easy operation for all users.

Care & Cleaning

Unplug the unit before cleaning. Use a soft, dry cloth to wipe the exterior.

CAUTION! Do not use harsh chemicals or liquids to clean the unit.

Regulatory Information

This unit complies with FCC regulations and is certified for residential use. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord connections.
No cooling	Incorrect mode or low refrigerant	Ensure unit is in cooling mode; contact service if needed.
Excessive noise	Loose parts or debris	Inspect for loose components; clean air filter.
Water leakage	Improper installation	Check window kit and drainage system.

Reset: Unplug the unit for 10 seconds, then plug back in.

Service: For assistance, contact customer service or visit the website.