Black and Decker BPC10CJ Air Conditioner Manual

The Black and Decker BPC10CJ is a portable air conditioner designed to provide efficient cooling for rooms up to 250 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidification settings. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting the Unit 7. Operating the Air Conditioner 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Fan Speeds	Customize airflow to your preference
Built-in Dehumidifier	Reduces humidity for added comfort

Installation

Unpack the air conditioner and inspect for any damage. Place the unit near a window for easy venting.

Install the window kit according to the instructions.
Connect the exhaust hose to the unit and window kit.
Plug the unit into a grounded outlet.
Ensure the unit is level for optimal performance.

WARNING! Ensure proper ventilation to avoid overheating.

First-Time Setup

Power on the unit and set the desired cooling mode.

Press the power button to turn on the unit.
Select the cooling mode using the mode button.
Adjust the temperature using the up/down buttons.
Set the fan speed according to your preference.

CAUTION! Do not block air intake or exhaust.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 250 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio: 12.0 EER.
Dimensions: 28.1 x 17.5 x 15.5 inches.
Weight: 60 lbs.
Noise Level: 52 dB.

Controls and Settings

Access settings via the control panel or remote. Features include power, mode selection, temperature adjustment, and fan speed control.

Remote: Power, Mode, Temperature, Fan Speed, Timer.

Connecting the Unit

Ensure the air conditioner is properly vented to the outside.

Turn off the unit before connecting/disconnecting.
Ensure the exhaust hose is securely attached.
Check for any leaks in the venting system.

Tip: Use duct tape to seal any gaps in the window kit.

Operating the Air Conditioner

Follow the instructions for optimal operation.

Set the desired temperature and mode.
Monitor the room temperature for comfort.
Adjust settings as needed for efficiency.

WARNING! Do not operate without proper installation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the air filter every month.
Check and clean the exhaust hose regularly.
Store the unit properly during off-seasons.

CAUTION! Unplug before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power source and connections.
Insufficient cooling	Dirty filter	Clean or replace the air filter.
Water leakage	Blocked drain	Check and clear the drain line.
Unusual noise	Loose parts	Inspect for loose components.

Service: For further assistance, contact customer support.