Black and Decker BPACT12HWT Air Conditioner Manual

The Black and Decker BPACT12HWT is a 12,000 BTU portable air conditioner designed for cooling rooms up to 300 square feet. It features a built-in dehumidifier, remote control, and multiple cooling modes to ensure comfort during hot weather. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12,000 BTU cooling capacity, built-in dehumidifier, remote control, multiple fan speeds, and programmable timer.

Feature	Description
Cooling Capacity	12,000 BTU for rooms up to 300 sq. ft.
Dehumidifier	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Multiple Fan Speeds	Adjustable speeds for customized airflow.
Programmable Timer	Set the unit to turn on/off at specific times.

Installation

Unpack and inspect contents. Place the unit on a flat surface near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and can handle the load.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow the remote control instructions.

Select cooling mode: Use the mode button on the remote.
Set desired temperature: Adjust using the temperature controls.
Set fan speed: Choose from low, medium, or high.

CAUTION! Ensure the unit is properly installed before operation.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 300 sq. ft.
Power Supply: 115V/60Hz.
Dehumidification: Up to 1.5 pints/hour.
Noise Level: 52 dB.
Weight: 70 lbs.

Controls and Settings

Access controls via the remote or the unit's control panel. Features include power, mode selection, temperature adjustment, and fan speed settings.

Connecting Devices

Ensure the air conditioner is properly connected to a power source and the window kit is securely installed.

Turn off the unit before making any adjustments.
Ensure all connections are tight and secure.

Tip: Regularly check connections to ensure optimal performance.

Operating the Air Conditioner

To operate, use the remote control or the control panel on the unit.

Power on the unit: Press the power button.
Select cooling mode: Choose from cool, fan, or dry.
Adjust temperature and fan speed as needed.

WARNING! Do not block air intake or exhaust vents.

Accessibility Features

The remote control is designed for easy access, and the unit features clear indicators for operation.

Care & Cleaning

Unplug the unit before cleaning. Use a damp cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the unit is dry before plugging it back in.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.blackanddecker.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unit not plugged in	Check power connection and outlet.
Not cooling	Improper installation	Ensure window kit is properly installed.
Excessive noise	Loose parts	Check for loose components and tighten.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 5 minutes to reset.

Service: Contact customer support for further assistance.