Black and Decker BPACT10 Air Conditioner Manual

The Black and Decker BPACT10 is a portable air conditioner designed to cool rooms up to 250 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Fan Speeds	Customize airflow to your preference
Built-in Dehumidifier	Reduces humidity for added comfort

Installation

Unpack and inspect contents. Place the air conditioner in a suitable location near a window.

Install the window kit: Follow the instructions to secure the window kit in place.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the unit is plugged into a grounded outlet.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner; follow the on-screen prompts.

Select cooling mode: Choose from Cool, Fan, or Dry modes.
Set temperature: Use the remote or control panel to adjust the temperature.
Adjust fan speed: Select your preferred fan speed for optimal comfort.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 250 sq. ft.
Power Supply: 115V, 60Hz.
Noise Level: 52 dB.
Weight: 60 lbs.
Dimensions: 28.1 x 17.1 x 15.4 inches.
Energy Efficiency Ratio: 12.0 EER.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, fan speed selection, and mode selection.

Remote: Power, Mode, Temperature Up/Down, Fan Speed.

Connecting Devices

Ensure the air conditioner is connected to a power source and the exhaust hose is properly installed.

Turn off the unit before making any adjustments.
Ensure all connections are secure.

Tip: Keep the area around the unit clear for optimal airflow.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired mode and temperature.

Press the power button to turn on.
Select the cooling mode and set the temperature.
Adjust fan speed as needed.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the filters monthly and ensure the unit is free of dust and debris.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Improper installation	Check exhaust hose and window kit installation.
No power	Power supply issue	Ensure unit is plugged in and outlet is functional.
Excessive noise	Loose parts	Tighten any loose screws or components.
Water leakage	Full water tank	Empty the water tank and ensure proper drainage.

Service: For further assistance, contact customer support.