Black and Decker BP06PWA Air Conditioner Manual

The Black and Decker BP06PWA is a portable air conditioner designed for cooling rooms up to 150 square feet. It features a 6,000 BTU cooling capacity, a dehumidifier function, and a fan-only mode. The unit is equipped with a remote control, programmable timer, and adjustable thermostat for optimal comfort. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, programmable timer, and multiple cooling modes.

Feature	Description
Cooling Capacity	6,000 BTU for efficient cooling
Dehumidifier Function	Removes excess moisture from the air
Fan-Only Mode	Circulates air without cooling
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off at specific times
Adjustable Thermostat	Customize your comfort level

Installation

Unpack and inspect contents. Place the unit in a suitable location near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach it to the back of the air conditioner and the window kit.
Plug into AC power: Ensure the outlet is grounded and rated for the unit.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the unit; follow the remote control instructions.

Select cooling mode: Use the mode button on the remote.
Set desired temperature: Adjust using the thermostat controls.
Program timer: Set the unit to operate at specific times if needed.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 6,000 BTU.
Room Size: Up to 150 square feet.
Power Supply: 115V/60Hz.
Air Flow: 200 CFM.
Noise Level: 52 dB.
Weight: 50 lbs.
Dimensions: 28.1 x 17.1 x 14.5 inches.

Controls and Settings

Access settings via the remote control or control panel on the unit. Modes include Cool, Fan, and Dehumidify.

Remote: POWER, MODE, TEMP UP/DOWN, TIMER, FAN SPEED.

Adjust settings for optimal comfort and energy efficiency.

Connecting Devices

Ensure the unit is properly connected to a power source and the window kit is installed correctly.

Turn off the unit before making any adjustments.
Ensure all connections are secure.

Tip: Use a surge protector for added safety.

Operating the Air Conditioner

To operate, use the remote control or the control panel.

Press POWER to turn on the unit.
Select the desired mode and temperature.
Adjust fan speed as needed.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean or replace the air filter monthly.
Wipe the exterior with a damp cloth.
Check for any obstructions in the air intake and exhaust.

CAUTION! Always unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power outlet and connections.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Water leakage	Full water tank	Empty the water tank and check for blockages.
Excessive noise	Loose parts	Check for loose components and tighten if necessary.

Service: For further assistance, contact customer support.