Black and Decker BDMC2W Air Conditioner Manual

The Black and Decker BDMC2W is a portable air conditioner designed to provide efficient cooling for small to medium-sized rooms. It features a compact design, easy-to-use controls, and multiple cooling settings. This manual covers key sections including safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a dehumidifying function.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Fan Speeds	Customize airflow to your preference
Dehumidifying Function	Reduces humidity for added comfort

Installation

Unpack and inspect contents. Place the air conditioner on a flat, stable surface near a window.

Install the window kit: Follow the instructions to fit the window kit securely.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable to avoid tipping over. Check all connections before use.

First-Time Setup

Power on the unit; follow the on-screen prompts or use the remote control.

Select cooling mode: Use the mode button to choose between cooling, fan, and dehumidify.
Set temperature: Adjust the thermostat to your desired comfort level.
Adjust fan speed: Choose from low, medium, or high settings.

CAUTION! Ensure the unit is properly installed before operating.

Specifications

Cooling Capacity: 8000 BTU.
Power Consumption: 900 watts.
Air Flow Rate: 300 CFM.
Noise Level: 55 dB.
Weight: 60 lbs.
Dimensions: 28 x 18 x 14 inches.
Power Source: 115V AC, 60Hz.

Controls and Settings

Access controls via the front panel or remote. Features include power, mode selection, temperature adjustment, and fan speed settings.

Remote: Power, mode, temperature, fan speed, and timer settings.

Connecting Devices

Ensure the air conditioner is properly connected to the power outlet and the window kit is securely installed.

Turn off the unit before connecting any additional devices.
Ensure all connections are tight and secure.

Tip: Always check the power requirements before connecting to avoid damage.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings using the controls or remote.

Press the power button to turn on.
Select the cooling mode and set the temperature.
Adjust fan speed as needed.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the filters monthly and check for any blockages.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all relevant safety standards. For support, visit www.blackanddecker.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Excessive noise	Loose parts	Check for loose components or debris.
Water leakage	Blocked drain	Clear any blockages in the drainage system.

Service: For further assistance, contact customer support.