Black and Decker BD18WT6 Air Conditioner Manual

The Black and Decker BD18WT6 is a portable air conditioner designed to cool rooms up to 250 square feet. It features a sleek design, easy-to-use controls, and multiple cooling settings to ensure comfort during hot weather. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a dehumidifier function.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Fan Speeds	Customize airflow for comfort
Dehumidifier Function	Reduces humidity levels in the air

Installation

Unpack the air conditioner and inspect for any damage. Place the unit in a window or on a flat surface.

Install the window kit: Follow the instructions to secure the unit in the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into an electrical outlet: Ensure the outlet is grounded and can handle the load.

WARNING! Ensure the unit is stable and secure to avoid accidents.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts to set your preferences.

Select cooling mode: Choose between cool, fan, or dehumidify modes.
Set the temperature: Use the remote or control panel to adjust the temperature.
Adjust fan speed: Select your desired fan speed for optimal comfort.

CAUTION! Ensure the unit is properly installed before operating.

Specifications

Cooling Capacity: 18,000 BTU.
Room Size: Up to 250 square feet.
Power Consumption: 1,500 watts.
Noise Level: 52 dB.
Weight: 70 lbs.
Dimensions: 18 x 15 x 30 inches.
Power Source: 115V AC, 60Hz.

Controls and Settings

Access settings via the control panel or remote. Key controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, mode, temperature, fan speed, and timer settings.

Connecting Devices

Ensure the air conditioner is properly connected to a power source. Use the remote for easy operation.

Turn off the unit before connecting any devices.
Ensure all connections are secure and properly matched.

Tip: Keep the area around the unit clear for optimal airflow.

Operating the Air Conditioner

Follow these steps to operate your air conditioner effectively.

Power on the unit: Press the power button on the remote or control panel.
Select your desired mode: Choose between cooling, fan, or dehumidifying.
Adjust the temperature: Set your preferred temperature using the controls.
Monitor the performance: Check the display for current settings and adjustments.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean or replace filters as needed.

CAUTION! Always unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power outlet and connections.
No cooling	Incorrect settings	Ensure unit is set to cooling mode and temperature is set low enough.
Excessive noise	Loose parts	Check for loose components and secure them.
Water leakage	Clogged drain	Inspect and clear the drain line.

Reset: Unplug the unit for 10 minutes to reset.