Black and Decker BD14NWES Air Conditioner Manual

The Black and Decker BD14NWES is a portable air conditioner designed to cool rooms up to 350 square feet. It features a 14,000 BTU cooling capacity, a dehumidifier function, and a programmable timer. The unit is equipped with a remote control for convenience and has multiple fan speeds for customized comfort. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a dehumidifier function.

Feature	Description
Cooling Capacity	14,000 BTU for effective cooling
Dehumidifier Function	Removes excess moisture from the air
Remote Control	Convenient operation from a distance
Programmable Timer	Set cooling schedules for convenience
Multiple Fan Speeds	Customize airflow to your preference

Installation

Unpack and inspect contents. Place the unit in a suitable location.

Install the window kit: Follow the instructions to fit the unit in the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the unit; follow the remote control instructions.

Set the desired temperature using the remote control.
Select the cooling mode: Choose between cool, fan, or dehumidify.
Adjust fan speed as needed for comfort.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 14,000 BTU.
Room Size: Up to 350 square feet.
Power Supply: 115V/60Hz.
Dehumidification: Up to 3.1 pints/hour.
Fan Speeds: 3 speeds available.
Noise Level: 52 dB (low speed).
Weight: 70 lbs.

Controls and Settings

Access settings via the remote control or the control panel on the unit. Controls include power, temperature adjustment, fan speed, and mode selection.

Connecting Devices

Ensure the air conditioner is properly connected to a power source. Use the remote control for operation.

Turn off the unit before making any connections.
Ensure the exhaust hose is securely attached.

Tip: Keep the area around the unit clear for optimal airflow.

Operating the Air Conditioner

To operate, use the remote control to set your desired temperature and mode.

Press the power button to turn on the unit.
Select the cooling mode and adjust the temperature.
Monitor the room temperature and adjust settings as needed.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean or replace the air filter monthly.

CAUTION! Unplug the unit before performing any maintenance.

Regulatory Information

This unit complies with all applicable safety standards. For support, visit www.blackanddecker.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Improper installation	Check installation and ensure exhaust is properly connected.
Remote not working	Batteries	Replace batteries in the remote control.
Water leakage	Full water tank	Empty the water tank and check for blockages.
Noise during operation	Loose parts	Check for loose screws or components.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-800-234-5678; www.blackanddecker.com