Black and Decker BD12NWES Air Conditioner Manual

The Black and Decker BD12NWES is a portable air conditioner designed for efficient cooling in small to medium-sized rooms. It features a 12,000 BTU cooling capacity, a dehumidifier function, and a programmable timer. The unit is equipped with a remote control, multiple fan speeds, and an easy-to-clean filter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

FeatureDescription
Portable DesignEasy to move from room to room
Remote ControlConvenient operation from a distance
Adjustable ThermostatSet your desired temperature easily
Multiple Fan SpeedsCustomize airflow to your preference
Dehumidifier FunctionReduces humidity levels in the room
Easy-to-Clean FilterMaintains air quality and efficiency

Installation

Unpack and inspect contents. Place the air conditioner on a flat surface near a window.

  1. Install the window kit: Follow the instructions to fit the kit to your window size.
  2. Connect the exhaust hose: Attach one end to the air conditioner and the other to the window kit.
  3. Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the air conditioner; follow the remote control prompts.

  1. Set the desired temperature using the remote.
  2. Select the fan speed: Low, Medium, or High.
  3. Activate the dehumidifier mode if needed.

CAUTION! Ensure the air conditioner is placed in a well-ventilated area.

Specifications

Controls and Settings

Access settings via the remote control or the unit's control panel. Features include temperature adjustment, fan speed selection, and mode settings (cool, fan, dehumidify).

Connecting Devices

No external devices are required for operation; however, ensure the unit is connected to a suitable power outlet.

Operating the Air Conditioner

To operate, simply power on the unit and set your desired temperature and mode using the remote control.

Accessibility Features

The remote control is designed for easy access, allowing users to operate the air conditioner without needing to reach the unit.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior and clean the filter regularly to maintain performance.

CAUTION! Do not use harsh chemicals or abrasive materials.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.blackanddecker.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit does not turn onNo powerCheck power outlet and connections.
No coolingIncorrect settingsEnsure unit is set to cooling mode.
Excessive noiseImproper installationCheck for secure placement and level surface.
Water leakageFull reservoirEmpty the water tank as per instructions.

Reset: Unplug the unit for 10 seconds to reset.

Service: 1-800-234-5678; www.blackanddecker.com

Black and Decker BD12NWES Air Conditioner Manual © - All Rights Reserved 2026