Black and Decker BD10WT6 Air Conditioner Manual

The Black and Decker BD10WT6 is a portable air conditioner designed to cool rooms up to 250 square feet. It features a 10,000 BTU cooling capacity, a dehumidifier function, and a fan-only mode. The unit is equipped with a remote control, programmable timer, and adjustable temperature settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Cleaning 9. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, dehumidifier function, and fan modes.

Feature	Description
10,000 BTU Cooling	Cools rooms up to 250 sq. ft.
Dehumidifier Function	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off automatically.
Adjustable Thermostat	Customize your comfort level.
Fan Modes	Choose between different fan speeds.

Installation

Unpack and inspect contents. Place the air conditioner on a flat surface near a window.

Install the window kit: Follow the instructions to fit the window kit securely.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the unit; follow the remote control instructions.

Set the desired temperature using the remote.
Select the cooling mode: Choose between cool, fan, or dehumidify.
Program the timer if needed.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 250 sq. ft.
Power Supply: 115V/60Hz.
Dehumidification: Up to 2.3 pints/hour.
Noise Level: 52 dB.
Weight: 60 lbs.
Dimensions: 28.5 x 17.5 x 14 inches.

Controls and Settings

Access settings via the remote control. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: POWER, MODE, TEMP UP/DOWN, FAN SPEED, TIMER.

Connecting Devices

Ensure the air conditioner is plugged in and properly installed before connecting any devices.

Use the remote control to operate the unit.
Ensure no obstructions are in front of the air intake and exhaust.

Tip: Keep the area around the unit clear for optimal performance.

Operating the Air Conditioner

Follow the instructions for cooling, dehumidifying, or using the fan mode.

Press the POWER button to turn on the unit.
Select the desired mode using the remote.
Adjust the temperature as needed.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Cleaning

Regular maintenance is essential for optimal performance. Clean the air filter monthly.

CAUTION! Always unplug the unit before cleaning.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode.
Excessive noise	Obstruction	Check for objects blocking the air intake or exhaust.
Water leakage	Full tank	Empty the water tank as per instructions.

Service: For further assistance, contact customer support.