Black and Decker BD10WT Air Conditioner Manual

The Black and Decker BD10WT is a portable air conditioner designed for cooling rooms up to 250 square feet. It features a 10,000 BTU cooling capacity, a dehumidifier function, and a programmable timer. The unit is equipped with a remote control, adjustable fan speeds, and a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable fan speeds, dehumidifier function, programmable timer.

Feature	Description
Cooling Capacity	10,000 BTU for effective cooling
Dehumidifier	Removes excess moisture from the air
Remote Control	Convenient operation from a distance
Adjustable Fan Speeds	Customize airflow to your preference
Washable Filter	Easy maintenance for clean air
Programmable Timer	Set the unit to turn on/off at specific times

Installation

Unpack the air conditioner and inspect for any damage. Place the unit on a flat, stable surface near a window.

Install the window kit: Follow the instructions to fit the kit into your window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure proper ventilation and avoid blocking air intake or exhaust.

First-Time Setup

Power on the air conditioner and follow the remote control instructions.

Select cooling mode: Use the mode button on the remote to choose between cooling, fan, and dehumidifier modes.
Set the desired temperature: Use the temperature buttons to adjust the cooling level.
Adjust fan speed: Choose from low, medium, or high fan settings.

CAUTION! Ensure the unit is level for optimal performance.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 250 square feet.
Power Supply: 115V, 60Hz.
Noise Level: 52 dB (low setting).
Weight: 60 lbs.
Dimensions: 28.1 x 17.1 x 15.2 inches.
Energy Efficiency Ratio (EER): 12.1.

Controls and Settings

Access settings via the remote control or control panel on the unit. Features include power, mode selection, temperature adjustment, and fan speed control.

Remote: Power, mode, temperature up/down, fan speed, timer.

Connecting Devices

Ensure the air conditioner is properly installed and connected to a power source.

Turn off the unit before connecting any additional devices.
Use the remote control for operation.

Tip: Keep the remote control within range for optimal performance.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings using the remote control.

Adjust temperature and fan settings as needed.
Use the timer function to schedule operation times.
Monitor the filter indicator for maintenance reminders.

WARNING! Do not block air intake or exhaust vents.

Accessibility Features

The air conditioner is designed for easy access and operation, featuring large buttons and a remote control for convenience.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior and a vacuum to clean the filter.

CAUTION! Do not use abrasive cleaners or immerse the unit in water.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.blackanddecker.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power source and ensure unit is plugged in.
No cooling	Incorrect settings	Ensure unit is set to cooling mode and temperature is set correctly.
Excessive noise	Improper installation	Ensure unit is level and not touching any surfaces.
Water leaks	Full tank	Empty the water tank and ensure proper drainage.

Reset: Unplug the unit for 10 seconds to reset.

Service: For assistance, contact customer service at 1-800-234-5678 or visit www.blackanddecker.com.