Black and Decker BD10NWES Air Conditioner Manual

The Black and Decker BD10NWES is a portable air conditioner designed to cool rooms up to 250 square feet. It features a 10,000 BTU cooling capacity, a dehumidifier function, and a fan-only mode. The unit is equipped with a remote control, programmable timer, and adjustable thermostat for optimal comfort. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, programmable timer, dehumidifier function.

Feature	Description
10,000 BTU Cooling	Effective cooling for rooms up to 250 sq. ft.
Dehumidifier Function	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off at specific times.
Adjustable Thermostat	Customize your comfort level.
Fan-Only Mode	Circulates air without cooling.
Easy to Install	Includes window installation kit.
Energy Efficient	Helps save on electricity bills.

Installation

Unpack and inspect contents. Place the air conditioner in a suitable location.

Install the window kit: Follow the included instructions to fit the unit in a window.
Connect the exhaust hose: Ensure it is securely attached to the unit and window kit.
Plug into AC power: Use a dedicated outlet for optimal performance.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow the remote control prompts.

Set the desired temperature: Use the remote or control panel.
Choose the mode: Select cooling, fan, or dehumidifier mode.
Program the timer: Set the unit to operate at specific times.

CAUTION! Ensure proper ventilation around the unit.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 250 sq. ft.
Power Supply: 115V/60Hz.
Dehumidification: Up to 2.5 pints/hour.
Noise Level: 52 dB.
Weight: 60 lbs.
Dimensions: 17.5 x 13.5 x 28 inches.

Controls and Settings

Access settings via the remote control or control panel. Features include temperature adjustment, mode selection, and fan speed control.

Remote: Power, temperature settings, mode selection, timer, fan speed.

Modes: Cool, Fan, Dehumidify. Fan speeds: Low, Medium, High.

Connecting Devices

Ensure proper connections for optimal performance.

Turn off the unit before connecting any devices.
Use the provided window installation kit for secure fitting.
Ensure the exhaust hose is properly connected to the window kit.

Tip: Regularly check connections for wear and tear.

Operating the Air Conditioner

Follow these steps to operate the air conditioner effectively.

Power on the unit using the remote or control panel.
Select the desired mode and temperature.
Adjust fan speed as needed.
Monitor the room temperature for optimal comfort.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The air conditioner includes easy-to-use controls and a remote for convenience.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the unit is dry before plugging it back in.

Regulatory Information

This air conditioner complies with applicable safety standards and regulations. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power cord and outlet.
No cooling	Improper settings	Ensure unit is set to cooling mode.
Excessive noise	Loose parts	Check for loose screws or components.
Water leakage	Clogged drain	Inspect and clear the drain line.

Reset: Unplug the unit for 5 minutes to reset.

Service: Contact customer support for further assistance.