Black and Decker BD08WT6 Air Conditioner Manual

The Black and Decker BD08WT6 is a portable air conditioner designed to provide efficient cooling for rooms up to 150 square feet. It features a compact design, easy-to-use controls, and multiple cooling modes, including fan and dehumidification settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Portable design	Easy to move from room to room
Remote control	Convenient operation from a distance
Adjustable thermostat	Set your desired temperature easily
Multiple fan speeds	Customize airflow to your preference
Built-in dehumidifier	Reduces humidity for added comfort

Installation

Unpack and inspect contents. Place the unit on a flat surface near a window.

Install the window kit: Follow the instructions to fit the kit to your window size.
Connect the exhaust hose: Attach one end to the air conditioner and the other to the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Select cooling mode: Use the mode button to choose between cool, fan, and dehumidify.
Set desired temperature: Adjust using the up/down buttons.
Set timer: Program the unit to turn on or off at specific times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 8000 BTU.
Room Size: Up to 150 sq. ft.
Power Consumption: 900 watts.
Noise Level: 52 dB.
Weight: 50 lbs.
Dimensions: 28 x 15 x 12 inches.
Power Source: 115V AC, 60Hz.

Controls and Settings

Access controls via the front panel or remote. Features include power, mode selection, temperature adjustment, and fan speed settings.

Remote: Power, mode, temperature, fan speed, timer.

Connecting Devices

Ensure the air conditioner is properly connected to the power outlet and the window kit is securely installed.

Check power connection: Ensure the plug is fully inserted into the outlet.
Verify window installation: Ensure the window kit is sealed to prevent air leaks.

Tip: Avoid using extension cords with the unit.

Operating the Air Conditioner

To operate, press the power button and select your desired mode and temperature.

Turn on the unit: Press the power button.
Select cooling mode: Choose between cool, fan, or dehumidify.
Adjust temperature: Use the up/down buttons to set your desired temperature.
Set timer: Program the unit to turn on or off at specific times.

WARNING! Do not block the air intake or exhaust.

Accessibility Features

The air conditioner includes easy-to-read controls and a remote for convenient operation.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the unit is dry before plugging it back in.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.blackanddecker.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Improper installation	Check window kit and exhaust hose connections.
No power	Power cord issue	Ensure the unit is plugged in and outlet is functional.
Excessive noise	Loose parts	Check for loose screws or components.
Water leakage	Full water tank	Empty the water tank and ensure proper drainage.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-800-234-5678; www.blackanddecker.com