Black and Decker BD06WT6 Air Conditioner Manual

The Black and Decker BD06WT6 is a compact and efficient air conditioning unit designed for small spaces. It features a cooling capacity of 6,000 BTUs, making it ideal for rooms up to 250 square feet. This air conditioner comes with a remote control, programmable timer, and multiple cooling modes to ensure comfort during hot weather. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact design, remote control, programmable timer, multiple cooling modes, and energy-saving features.

Feature	Description
Cooling Capacity	6,000 BTUs for rooms up to 250 sq. ft.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off at specific times.
Multiple Cooling Modes	Cool, fan, and dehumidify modes available.
Energy Efficiency	Designed to save energy while providing comfort.

Installation

Unpack and inspect contents. Place the air conditioner in a window or suitable opening.

Remove the window frame and install the mounting brackets.
Slide the air conditioner into the window frame.
Secure the unit and ensure it is level.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely installed to avoid accidents.

First-Time Setup

Power on the air conditioner; follow the remote control instructions.

Select cooling mode: Press the mode button to choose.
Set desired temperature: Use the up/down buttons on the remote.
Adjust fan speed: Select low, medium, or high as needed.
Program timer: Set the on/off times using the timer button.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Model: Black and Decker BD06WT6.
Cooling Capacity: 6,000 BTUs.
Room Size: Up to 250 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Weight: Approximately 50 lbs.
Dimensions: 18.5 x 15 x 12 inches.

Controls and Settings

Access settings via the remote control. Key functions include power, mode selection, temperature adjustment, and fan speed control.

Remote: Power, mode, temperature up/down, fan speed, timer.

Settings: Adjust temperature, select cooling mode, and set timer for convenience.

Connecting Devices

Ensure the air conditioner is plugged into a grounded outlet. No additional devices are required for operation.

Turn off the air conditioner before connecting to power.
Ensure the outlet is compatible with the unit's plug.

Tip: Use a surge protector for added safety.

Operating the Air Conditioner

To operate, use the remote control to select the desired settings.

Press the power button to turn on the unit.
Select the cooling mode and adjust the temperature.
Monitor the room temperature and adjust settings as needed.
Turn off the unit when not in use.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean or replace the air filter monthly.

CAUTION! Unplug the unit before performing any maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.blackanddecker.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and outlet.
No cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set.
Excessive noise	Improper installation	Check installation and ensure unit is level.
Water leakage	Clogged drain	Inspect and clear the drain line.

Reset: Unplug the unit for 5 minutes to reset.

Service: For assistance, contact customer service.