Black and Decker BD06WT Air Conditioner Manual

The Black and Decker BD06WT is a portable air conditioner designed to cool rooms up to 150 square feet. It features a 6,000 BTU cooling capacity, a dehumidifier function, and a fan-only mode. The unit is equipped with an easy-to-use digital display, remote control, and programmable timer. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, digital display, remote control, adjustable thermostat, multiple fan speeds.

Feature	Description
Cooling Capacity	6,000 BTU for effective cooling
Dehumidifier Function	Removes excess moisture from the air
Fan Modes	Multiple fan speeds for customized airflow
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off automatically

Installation

Unpack and inspect contents. Place the unit in a suitable location.

Install the window kit: Follow the instructions to fit the kit to your window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow on-screen prompts.

Set cooling mode: Use the mode button to select cooling, fan, or dehumidifier mode.
Adjust temperature: Set your desired temperature using the up/down buttons.
Set timer: Use the timer function to schedule operation times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 6,000 BTU.
Room Size: Up to 150 square feet.
Power Supply: 115V/60Hz.
Weight: Approximately 50 lbs.
Dimensions: 28.5 x 17.5 x 14 inches.
Noise Level: 52 dB.
Energy Efficiency Ratio: 12.0 EER.

Controls and Settings

Access settings via the digital display or remote control. Key controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, mode, temperature, fan speed, timer.

Settings: Adjust cooling, fan speed, and timer for optimal comfort.

Connecting Devices

Ensure proper power connection and window installation before use.

Turn off the unit before connecting any additional devices.
Use the appropriate power outlet for the air conditioner.

Tip: Ensure the unit is properly vented to the outside for optimal performance.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings.

Press the power button to turn on.
Select cooling mode and adjust the temperature.
Use the fan speed button to adjust airflow.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean or replace the air filter every month. Ensure the exhaust hose is clear of obstructions.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.blackanddecker.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power connection and outlet.
No cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set low enough.
Excessive noise	Obstruction	Check for any objects blocking the air intake or exhaust.
Water leakage	Full water tank	Empty the water tank and ensure proper drainage.

Reset: Unplug the unit for a few minutes to reset if necessary.

Service: For assistance, contact customer service at 1-800-234-5678.